Spec Grade Silicone
Specification Grade Silicone sheeting is designed to be used in applications where higher physical properties and lower compression set are required. The material is available in continuous rolls or sheets. It is resistant to extremely high and low temperatures and is proven to be an excellent gasketing material, and is available in many colors. Sheet thickness ranges from .010" up to 1" thick. Available width up to 75" wide.
Our most economical Silicone still meets the stringent specs required by engineers. Simply put, we offer Silicone at an exceptional price without lowering standards. Our Silicones meets ZZR-765 (2A, 2B) and A-A-59588. Furthermore, depending on the durometer, our Silicones meet:
- 40 DURO Silicone meets AMS 3301
- 50 DURO Silicone meets AMS 3302
- 60 DURO Silicone meets AMS 3303
- 70 DURO Silicone meets AMS 3304
- 80 DURO Silicone meets AMS 3305
| SILICONE RUBBER BY THE NUMBERS | |||
| COLOR | DUROMETER | TEMPERATURE | TENSILE |
| Red, Black, Grey & Custom | 25-80 and Custom | -80-450F with ability to handle higher temps in shorter spurts | >1/64” to 1” |
These numbers are a general guide and are subject to change at any time. Our team offers materials to meet any project. If you have special requirements for things like color, tensile, temperature, durometer, etc, please reach out to our team. Just because material listed doesn’t meet your spec does not meet it is not available.
Properties and application parameters shown throughout this datasheet are typical. Your specific application should not be undertaken without independent study and evaluation for suitability. For specific application recommendations consult Blaylock Gasket. Failure to select proper sealing products could result in property damage and/or serious personal injury.
Contact Us Today
Reach out to us about any of our materials and experience the pride our company takes in defining quality, stability, and service.
QUALIFICATIONS & CREDENTIALS
